|
Pulse Generator
System-on-a-Chip (SoC)
Pulse Generator System Boards
Evaluation and Prototyping Kits
|
|
All
products developed by Herbst Research, Inc. are manufactured and marketed
through our sister company, Herbst Technologies, Inc. For more detailed
information on all standard, off-the-shelf products, as well as for product
brochures and data sheets, please go to: www.herbst-technologies.com.
A brief description of our product line follows.
EH2000TM Series Chips
|
|
EH2000TM
Series digital pulse generator system-on-a-chip (SoC) offers synchronous, programmable
pulse generator devices of high precision. The EH2000 TM Series
currently consists of three components (EH2300TM, EH2500TM
and EH2900TM). EH2300 TM and EH2500 TM
are subsets of EH2900 TM. The system-on-a-chip (SoC) solution
allows for unlimited, reconfigurable signal solutions for biomedical
instrumentation and precision control applications.
|
EPB2000TM Series Evaluation
and Prototyping Boards
|
|
The
EPB2000TM Series Evaluation and Prototyping Boards were
developed to support evaluation and prototyping work with the EH2000
TM Series Chips. The EPB2000 TM Series currently includes
three evaluation boards—EPB2300 TM, EPB2500 TM and
EPB2900TM—one board for each of the EH2000 TM Series
Chips. The EPB2000 TM Series Evaluation and Prototyping Boards
combine ease-of-use with familiar standards. This includes a 3U format
board equipped with a standard, unpopulated VME connector and it is
immediately useable in user’s test equipment as a plug-in board.
|
GPO400TM General Purpose
Board
|
|
The
easy-to-use GPO400 TM interface board can be used in combination
with EPB2000 TM Series Evaluation Boards or independently with
third party boards. Its BCD (binary coded decimal) format makes it simple
to use the board right out of the box; even for someone with limited
electronics knowledge. Like the EPB2000 TM, the GPO400 TM
is a 3U format board equipped with a standard, unpopulated VME connector
and it is immediately useable in user’s test equipment as a plug-in board.
|
EPK2000TM Series Evaluation
and Prototyping Kits
|
|
These
kits consist of EPB2000 TM Series Boards and GPO400 Board with a
connecting cable and 5V power supply. Three kits are available–EPK2300
TM, EPK2500 TM and EPK2900 TM –one kit for each
of the EH2000 TM Series Chips. They allow users to quickly
program the EH2000 TM Series Pulse Generator Chips. No other
equipment or software is needed. Once the kits are powered-up and the
inputs are set, the outputs are instantly enabled and verifiable in the
prototyping area with an oscilloscope.
|
|
